Bluesbird selector switch problems

cmsjr

Junior Member
Joined
Jun 18, 2005
Messages
12
Reaction score
0
Location
Bay Area, CA
I know that the BB selector switches can be problematic but does anyone have a fix? Mine cuts out going to the bridge pickup. If I switch it back and forth a few times it wil kick back in or if I hit the strings hard and send a big signal through it'll start working again also. That makes me think that it's just a bit corroded in there. Has anyone used a good cleaner lubricant to correct this?
 

matsickma

Senior Member
Joined
Jun 21, 2005
Messages
4,280
Reaction score
1,028
Location
Coopersburg, PA
Hi cmsjr,

I have used Radio Shack contact cleaner on mine and it fixed it right up. It appears the problem is that the rubber cap on the switch that holds the switch in position seems to dry out and keeps the switch from seating properly. It didn't appear to be a dirty contact problem. Use only a small amount or the switch will tend not to hold in the neck or bridge position.

M
 
Top