Burnside Blade Wiring

[keller9431]

I have a Burnside Blade that I have had since I was a kid and this thing has sat in the case for the last 20 years. Got it out the other day and it has no sound when plugged into the amp. Took the cover off the back and wires are broke off from the solder. Anyone have a wiring diagram for this and should I just replace all the components with new and start over? I attached a few pics of the guitar for reference.

 

[GAD]

I could make one easily enough and I need to anyway. I’ll try and get to it today.

 

[keller9431]

I could make one easily enough and I need to anyway. I’ll try and get to it today.

Man that would be great if you could, I would really appreciate it.

 

[fronobulax]

Man that would be great if you could, I would really appreciate it.

Welcome.

While you are waiting...

Guild Burnside Crossbow | GAD's Ramblings

This glorious piece of ’80s goodness is the fairly uncommon Burnside (by Guild) Crossbow guitar, and thanks to a tip from a user on The Gear Page I scored this rarity from Guitar Center for the princely sum of $500. Was it worth it? How’s it sound? How’s it play? Read on while I answer …

www.gad.net

Guild Burnside Lance | GAD's Ramblings

In a departure from my normal Guild reviews, today’s writeup is about the Burnside Lance, model BE100R. While not strictly speaking a Guild, Burnside was a company that operated under the Guild umbrella so that Guild could sell less expensive import guitars along with their US-made brethren...

www.gad.net

Guild Pickup Wiring | GAD's Ramblings

I’ve owned many Guild guitars, and due to the fact that I have a soldering iron and I’m not afraid to use it, I’ve learned a fair bit about various Guild pickups and their wiring. Since there seems to be little information on the Internet about this topic, I decided to write up what I …

www.gad.net