refret
Member
After deciding that the time had come to hang up the shop apron and retire from repairing acoustics, I have decided to unload a bunch of tools accumulated over the past 30 years or so....
Most of it came from Stew-mac, a few discontinued, but most is viewable on their online catalog.
Neck removal jig
Bridge slot routing jig for use with a Dremel, including a 1/8 dia. Carbide cutter
Bridgeplate removal irons and chisels. (They need sharpening) Also discontinued long ago.
Bridge clamping caul and a bunch of plywood cauls of various shapes that I have cut over the years.
Bridge saver. This set cuts cone shaped divots around the pin holes in the bridgeplate, and cuts replacement cones out of maple or rosewood to glue and clamp in place. Only used once.
Bridge removal spatula
I would like to get 500 for the load, and will probably throw in more stuff as I think of it.
Everything has been used, but has a lot of life left.
I will be getting hernia surgery on Monday, so I will be laying around for a few weeks.
I would like to do a pickup, local to Southern NJ across from Philadelphia.
Most of it came from Stew-mac, a few discontinued, but most is viewable on their online catalog.
Neck removal jig
Bridge slot routing jig for use with a Dremel, including a 1/8 dia. Carbide cutter
Bridgeplate removal irons and chisels. (They need sharpening) Also discontinued long ago.
Bridge clamping caul and a bunch of plywood cauls of various shapes that I have cut over the years.
Bridge saver. This set cuts cone shaped divots around the pin holes in the bridgeplate, and cuts replacement cones out of maple or rosewood to glue and clamp in place. Only used once.
Bridge removal spatula
I would like to get 500 for the load, and will probably throw in more stuff as I think of it.
Everything has been used, but has a lot of life left.
I will be getting hernia surgery on Monday, so I will be laying around for a few weeks.
I would like to do a pickup, local to Southern NJ across from Philadelphia.
