NGD: Starfire III-90

SFIV1967

Venerated Member
Joined
Nov 20, 2010
Messages
18,442
Reaction score
8,956
Location
Bavaria / Germany
Guild Total
8
...while the Grovers don't since one hole matches
Actually from the drawings I would be negative. Rotomatics have 10,5mm, the SXN510 10mm and I would bet the Grover 136 is even less than 10mm, more in the 9,5mm range. At least that is what I get when I enlage the drawing and compare and measure it with 2:1 size. So the bottom hole is 1mm off towards the center compared to the original Rotomatics hole if the drawings are correct.
Ralf
 

parker_knoll

Senior Member
Joined
Apr 27, 2006
Messages
1,453
Reaction score
410
Location
London
Actually from the drawings I would be negative. Rotomatics have 10,5mm, the SXN510 10mm and I would bet the Grover 136 is even less than 10mm, more in the 9,5mm range. At least that is what I get when I enlage the drawing and compare and measure it with 2:1 size. So the bottom hole is 1mm off towards the center compared to the original Rotomatics hole if the drawings are correct.
Ralf

Are you measuring from the capstan or that little hole? Either way, wait till they arrive and I can provide a conclusive answer.
 
Top