cobascis
Junior Member
- Joined
- Nov 1, 2018
- Messages
- 12
- Reaction score
- 0
I'm looking for a high resolution photo of under the control panel on an early 1970s Guild S-100 with Phase Switch. I'm following a schematic and having some issues. The previous owner copper-taped the cavity and is grounding everything to that. How was the original grounded? I found a picture without a phase switch wired.
Additionally, I'm wiring the HB-1s with two wires coming off of the terminals (hot and ground). The bridge pickup I've grounded to the bridge. I'm replacing the output jack and both capacitors. A photo of the back of one of these as wired would also be nice.
Additionally, I'm wiring the HB-1s with two wires coming off of the terminals (hot and ground). The bridge pickup I've grounded to the bridge. I'm replacing the output jack and both capacitors. A photo of the back of one of these as wired would also be nice.