Bringing a Starfire back to life.

Default

Super Moderator
Platinum Supporting
Joined
Jul 30, 2007
Messages
13,658
Reaction score
3,089
Location
Philly, or thereabouts
Guild Total
11
Not the De Armonds I had in mind, but still vintage. And at least it is for sale. From a Gretsch. But looks like a humbucker and not your usual Filtertron. Can't say I have ever heard one in a Gretsch. Size looks to be standard.

s-l1600.jpg

I have a set of pickups that look identical, but are single coils in a humbucker shell.
 

Default

Super Moderator
Platinum Supporting
Joined
Jul 30, 2007
Messages
13,658
Reaction score
3,089
Location
Philly, or thereabouts
Guild Total
11
By the way, Hans Moust wrote the Guild Guitar book. He could tell you when and probably how many were in the batch made.
 

geoguy

Senior Member
Joined
Mar 1, 2009
Messages
3,586
Reaction score
1,762
Location
metrowest MA
Welcome to LTG . . . perhaps posting the serial number with "XX" in place of the last two digits would be more comfortable for you. And enough info for folks to give you better advice re: how your guitar was originally outfitted.
 

Boneman

Senior Member
Joined
Aug 22, 2021
Messages
1,419
Reaction score
1,679
Guild Total
6
Fair enough you don’t want us to see how bad and unpresentable it is in its current state, but hopefully you at least still took photos to at least document its journey from trash to treasure. Besides, we’re curious what all it is that you do pull out from inside, and also whether the label is still legible.

The serial number would be stamped into the back of the headstock, so some indentations may still be visible with a good cleaning, unless they really did dig holes with it? Heh
 

Dardplay

Junior Member
Joined
Apr 26, 2024
Messages
13
Reaction score
2
Guild Total
1
I have a set of pickups that look identical, but are single coils in a humbucker shell.
Oh well, so probably single coil then. Would make sense.

I'm hoping these would fit?


index.php
 

Dardplay

Junior Member
Joined
Apr 26, 2024
Messages
13
Reaction score
2
Guild Total
1
By the way, Hans Moust wrote the Guild Guitar book. He could tell you when and probably how many were in the batch made.
Do you mean here an actual book, or that he just knows a lot about Guilds?

P. S. Oh, alright. I just googled it and there is a book. Never knew.
 

Dardplay

Junior Member
Joined
Apr 26, 2024
Messages
13
Reaction score
2
Guild Total
1
Hi! Things are moving slowly. But the electronics arrived. Now I'm wondering if I should have gone for a pre-wired harness.

I also managed to un-stuff the guitar. Nothing gross or strange inside. It was stuffed with this felt or wool like material. The reason I don't know. I'm suspecting that it was about to get a respray or refinish and the F-holes were stuffed to avoid over spray inside. Interestingly, even though it was stuffed, there seems to already be some over spray inside. That or very thick and sticky dust. The inside surface is covered by something fine. No raw wood color at the moment. Maybe it was already resprayed or refinished once. I didn't try to clean it thought. Didn't have a lot of time.

The smell is still strong. Wonder if I should leave it in the sun a bit, now that it is getting warmer. But probably not a good idea.

Found some numbers by the way. First few digits are 64100. I want to say 6A100, but I'm not sure they used letters too. It's not very legible under all the gunk.

Still on the hunt for a HB1 or De Armond set. I will continue working on the guitar. If by the time everything else is ready and only the pickups are missing and I still haven't found a HB1 or De Armond set, I might just buy some Gibson 57s and be done. Or maybe Seymour Duncan is less sacrilegious? I heard the Guilds came with SDs at some point?
 

Boneman

Senior Member
Joined
Aug 22, 2021
Messages
1,419
Reaction score
1,679
Guild Total
6
I wouldn’t leave the guitar out in the sun, but one thing to do for a bad smell, on those musty attic guitar finds, is if you have a case for it, you can put coffee beans in the case with guitar, lid closed and let the beans absorb the stench. I‘ve used a ziploc baggie poked holes in it, filled it with beans, and dropped it inside the soundhole of an acoustic. For your semi-hollow, fill the ziploc enough so you can still squeeze it into the f-hole, leaving enough of it to grab and pull it out later. Leave it for a week and it’ll smell less like mold and more like coffee, and then the coffee smell goes away.

I’d also dampen a rag with vinegar, wipe the interior of the case with dampened rag, and leave that out in the sun. Good luck 👍🏼
 
Top