One of my many retired hobbies is metal working which requires very accurate measurements (with work having to be within a plus or minus 2 thousandths of specified drawing).
My questions are:
1. Are measurements outside to outside
2. Inside to inside
3. Inside to outside
4. Or depends on what part of guitar you are measuring
Thought I might do some measuring just wanted to be sure I am comparing oranges to oranges.
My questions are:
1. Are measurements outside to outside
2. Inside to inside
3. Inside to outside
4. Or depends on what part of guitar you are measuring
Thought I might do some measuring just wanted to be sure I am comparing oranges to oranges.