Rayk
Enlightened Member
- Joined
- Apr 19, 2015
- Messages
- 5,793
- Reaction score
- 1,200
How do you eliminate rattle from tongue and groove wall boards
I figured id ask if there’s a building pro or pro wannabe on board lol .
Since I’m using T&G 1x6 for my entertainment center lining the thought acured to me that though it’s going to be reinforced by the 3 inch thick shelving all about that rattling from the surround system could happen .
I was originally just going to do the basic nailing technique well still will lol but I wondering if liquid nails should used as well ?
Ok so the floor is yours , ideas and or suggestions if any .
Thanks much
I figured id ask if there’s a building pro or pro wannabe on board lol .
Since I’m using T&G 1x6 for my entertainment center lining the thought acured to me that though it’s going to be reinforced by the 3 inch thick shelving all about that rattling from the surround system could happen .
I was originally just going to do the basic nailing technique well still will lol but I wondering if liquid nails should used as well ?
Ok so the floor is yours , ideas and or suggestions if any .
Thanks much
Last edited: