59Panhead
Junior Member
I'm planning my repairs on this amp. The spring tank had one broken spring, the input is completely open (no resistance), and the Reverb transformer is cooked. I pulled the 6GW8 tube and brought the amp up on the lamp limiter. After doing this, I fired it up and it sounds good. The Tremolo is weak, but I can chase that issue later. I want to repair the Reverb circuit first.
I can find no specs on the '4G' spring tank. And, the only specs that I can find on the transformer is one matching my numbers (007013 9264761) from Mercury Magnetics. They emailed me and told me the Primary impedance was 5K ohms, and the Secondary was 8 ohms. I have been trying to find more. Just no luck.
Can anyone confirm these impedances from some original literature? I have the Accutronics spring tank data sheet, but it has no info on these tanks. Thanks for any help. Have a good one.
Jack
I can find no specs on the '4G' spring tank. And, the only specs that I can find on the transformer is one matching my numbers (007013 9264761) from Mercury Magnetics. They emailed me and told me the Primary impedance was 5K ohms, and the Secondary was 8 ohms. I have been trying to find more. Just no luck.
Can anyone confirm these impedances from some original literature? I have the Accutronics spring tank data sheet, but it has no info on these tanks. Thanks for any help. Have a good one.
Jack